Gorilla Glue is primarily used to bind metal, wood, and other materials which are hard to stick.
Its most highlighted feature is that it doesn’t lose its quality in hot and cold weather; this makes it tough to get removed once it gets old.
And due to all these, it becomes challenging to remove gorilla glue from metal, hence why in this post we’re going to learn how to remove gorilla glue from metal!
- How to Remove Gorilla Glue from Plastic – (The Ultimate A-Z GUIDE)
- How to Get Gorilla Glue Off Clothes
- How to Get Gorilla Glue Off Skin: 7 Easy (but proven) HACKS
- How to Remove Super Glue from Skin at Home Quickly
How to Remove Gorilla Glue from Metal
The followings information explains how to get the Gorilla Glue off professionally from the metallic materials!
- Take fast action
- Remove with pointed tools
- Remove with sandpaper
- Remove with paint thinner
- Remove with heat
- Remove with isopropyl alcohol
- Remove with Denatured alcohol
- Remove with Acetone
- Remove using Hydrogen peroxide
Take fast action:
Take off the glue in real time from the metal if it’s not completely dried. Moreover, don’t let it get old, or it will get more tough and challenging to remove.
Get any pointed and robust tool, e.g., a knife or shaving blade. Scrap the glue as soon as possible with the available item. Continue the removal process before it gets dry.
Things to keep in mind:
- Make sure not to touch the glue with your skin, use any tool instead.
- Be cautious while holding and working with blades.
- Keep the metal area safe from scratches
Remove with pointed tools:
You can also use some pointed tools and a proper technique to scrap the glue from the metal quickly.
- Grab a hammer; and a chisel or a flat head screwdriver.
- Put the face of the tool in the edge of glue and begin hammering the tool.
- Repeat the process until the glue isn’t peeled off completely.
- The technique will only work best when you keep the chisel on edge/start of the glue.
- Use the tools only over the affected area, and make sure to protect the metal from scratches.
Remove with sandpaper:
Sandpapers are commonly used to remove dry material from the surfaces. However, with its front pointed finish; it can be used for the removal of Gorilla Glue from metals as well.
Here’s how to work with sandpaper to remove gorilla glue from metal:
- Get excellent grade sandpaper, (you can obtain one from tool shop.)
- Rub it over the affected area until the glue is not entirely excluded from the metal.
- Apply some pressure with your fingers, use different directional movements to remove it fast.
- Clean the removed glue particles and repeat the process.
- Keep the non-affected areas safe from the sandpaper.
The glue will hopefully break down in powder form with some efforts.
Remove with paint thinner:
Paint thinner is a lifesaving product for removing the oil-based paint from brushes. The best thing is, you can alternatively use it to vanish the thin coat of Gorilla glue from metal.
And here’s how you can achieve that:
- Take a piece of cloth; overlap it to make it strong.
- Add some of the paint thinners in cloth; apply it directly over the affected metal.
- Rub it over the glue for some seconds.
- Take another fresh piece of cloth and rub the affected area until the removal of glue.
Remove with heat:
Gorilla glue starts losing its bond from the metal when it comes under the temperature of 215 degrees. So, follow the point below explaining how to remove the glue using the heat.
- Get an old piece of metal; put it in the fire of stove.
- Let it heat as long as possible.
- Put the heated metal over the glue.
- If the glue starts melting at some point, it means it’s going to vanish the glue in some seconds.
- You may need to heat the metal again if you find no result on the glue.
Things to keep in mind:
- Be safe while heating the metal.
- Wear a protective glove when holding the hot metal.
- Be attentive and cautious while performing this dangerous method.
Remove with isopropyl alcohol:
Isopropyl alcohol helps in loosening the bond of glue from the metal. Moreover, it is a well-known chemical; widely used for the removal of gorilla glue from plastic and metallic materials.
- Dab a cotton ball in isopropyl alcohol; put it against the glue on the metal.
- Keep the alcohol over the glue for 5 minutes.
- Wipe the area with warm, soapy water.
- Scrap the glue with a knife; begin the scrapping process from the edge point of the glue. Take it towards the end by scrapping the glue from the start point.
Remove with Denatured alcohol:
Denatured alcohol is used as a cleaning agent against the dried liquids & you can also use it for removing the gorilla glue from the metal.
- Soak a cotton swab in denatured alcohol.
- Hold the cotton against the glue and wait until the alcohol dissolves.
- Wipe the area with a cloth and remove the glue with either a knife or a chisel.
- Repetition of the tip may require on the massively dried glues.
Remove with Acetone – an effective removal solution:
Acetone is effective in removing the harsh and dried chemical from surfaces. It is commonly added in nail polish removers too.
To work with it, get a 100% pure acetone or a nail polish remover consisting acetone in its solution and follow the following steps:
- Soak a cotton ball in acetone; press the cotton hard against the glue.
- Let the cotton sit on the glued area for about 5 minutes.
- Remove the cotton and clean the area with a slightly wet cloth.
- Take a sharp knife and scrap it over the glue. Don’t remove the glue until it doesn’t come into the soft form.
- You may need to repeat this method if the glue still stays over the metal.
Remove using Hydrogen peroxide – a hopeful item:
Hydrogen peroxide is used for removing strong and dried glues from the surfaces.
Follow the points below to give this chemical a promising try:
- Dab the cotton ball in Hydrogen Peroxide,
- Put the cotton against the glue for about 5 minutes.
- Hold the cotton until the softening of glue.
- Wash the glued area with any cloth.
- Scrap the glue with the help of any pointed tool.
- Clean the remaining particles of glue with a cloth.
Precautions while removing Gorilla Glue with any mentioned method:
The followings are the precautions that you must follow when removing gorilla glue from metal.
- Wear protective gloves and glasses before beginning the process.
- Don’t use massive force over the stainless steels or it will leave scratches over them.
- Be safe while scraping glue with a knife, blade, or any pointed tool.
- Before you use any new or rare chemical, test it over the small and hidden surface of the metal.
- Keep yourself attentive while working with pointed tools & reactive chemicals.
- Protect your eyes while scraping the metal, there are possible chances of tiny particles of either glue or metal to get into your eyes.
To the end, we hope that the removal of Gorilla glue from your metallic object would be now an easy task for you.
Plus, using some proper attempts, we believe that implementing one or more tips will end up, resulting in success for you.
The last thing, implement each of the methods cautiously and according to the way we suggested in the points.
If you have got any other tip(s) or question(s) in mind, please let us know by commenting below or by contacting us here.