How to Remove Gorilla Glue from Plastic – (The Ultimate A-Z GUIDE)

The removal process of Gorilla Glue is more sensitive to plastics than the other materials.

And that’s because; Gorilla glue is Polyurethane glue, which is capable of reacting quickly with moisture in the air. That makes it tough to remove from plastics materials.

Worries no more though, we’ve got a bunch of possible solution to get the glue off from the plastic in this post!

So, let’s dive in and learn how to remove gorilla glue from plastic!

Recommended posts:

How to Remove Gorilla Glue from Plastic?

The followings are the professional & tried and tested methods for removing glue from the plastics:

Act as quickly as possible (With any possible tool):
Remove with a sharp blade
Remove via Mineral spirit
Remove via acetone (with your own risk)
Try Isopropyl alcohol
Remove with rubbing alcohol
Remove with white vinegar
Remove using Nitromethane Component
Take off with vegetable oil
Use lubricant spray (Only for stains)

Act as quickly as possible (With any possible tool):

The most efficient way to get the glue off from any particular plastic is to remove it quickly before it gets dry. Furthermore, Gorilla glues can soon leave the material if you take fast action.

If the glue doesn’t turn hard, don’t waste time in search of a tool which is not at the place, find any of the available tools near to you, and begin scraping the glue quickly.

Things to keep in mind:

This method is only workable if the glue is soft. Otherwise, you have to follow other techniques for old and robust glue.
Makes sure not to check the glue condition with your skin, use any tool instead.

Remove with a sharp blade:

A sharp and pointed tool is an efficient item in removing the Gorilla glue.

Get a shaving blade; hold it carefully with a durable cloth.
Start scraping the glue coat from its edge, slowly move forward and scrap till its end point.
Don’t use the blade on the middle of glue, always work with the suggested; start to endpoints.
Prevent multiple removal attempts; otherwise, it will harm the plastic.
Be cautious & safe when working with the blade.
Don’t apply force, or it will leave cuts on the plastic.
Do the process slowly to make it successful.

Remove via Mineral spirit:

Mineral spirits are widely used for removing tough stains from construction tools and other materials. Hence why you can also use it for the removal of Gorilla glue from the plastic.

Get a dampened rag or a slightly wet cloth.
Add some mineral spirit to cloth and apply it over the glued area.
Let it remain for some seconds and then wash it thoroughly with a dampened rag.
Do not apply mineral spirit over the non-glued area of plastic.
Repetition may require on the harsh and dry glue.

Remove via acetone (with your own risk):

[alert type=”warning” icon-size=”normal”]Acetone can result in damage to some plastic materials. However, being a well-known solution against Gorilla glue, you can test it on other plastic. So, to be sure about its effects, try it first over any old and unwanted plastic.[/alert]

Get 100% acetone or a nail polish remover consisting acetone in its solution.
Dab a cotton ball in it and press it hard against the glue.
Let acetone sit on glue for 5 minutes.
Remove the cotton and clean the area with a slightly wet cloth.
For complete removal, you may need to attempt more than once.
Prevent using it if it is causing damage over the plastic.

Try Isopropyl alcohol – efficient removal tool:

Isopropyl alcohol assists in loosening the bond of glue from the plastic material.

Dab a cotton ball in isopropyl alcohol, and put it against the glued area.
Keep it there for about 5 minutes.
Take off the cotton and wipe the area with warm water.
You may need soapy water if the glue is hard to remove.
Begin the scraping with a knife, start with the edge of glue and continue scrapping till the end.

Remove with rubbing alcohol:

Hearing it for the first time? Well, it is a kind of alcohol that works as a solvent for hard and dry glues. Moreover, unlike other chemicals, it is safe to be used on your precious plastic material.

To remove the glue using it, follow the descriptive points mentioned below:

Fill the tub with water and mix a little liquid of dish soap.
Put the affected plastic in the solution for about 4 hours. After that much time, take it out from the tub.
Now soak a cotton ball in the rubbing alcohol, and put the cotton on the glue for 5 minutes.
When the glue turns soft, scrape it with a sharp knife or chisel.
Wash the remaining particles with warm, soapy water.

Remove with white vinegar:

Soaking glue with white vinegar results in softening of Gorilla glue, which is all that you need to take it off easily from plastic.

The following points describe how to remove the glue with white vinegar.

Soak a cotton ball or a piece of cloth in white vinegar. Squeeze the cotton to drip off the extra liquid.
Cover the glued area with a cotton ball. You may need more cotton balls on extensively affected plastic.
Let the cotton sit on glue for a few hours. After then, scrap it carefully with a pointed tool.
Wipe the messed glue particles with a dampened cloth.

Remove using Nitromethane Component:

This organic compound is primarily known as a tool to de-glue the plastics. It’s less reactive and less harmful to plastic materials. That makes it a safer tool against the glue than Acetone.

You can purchase a little of it from auto workshops or car fuel dealers.

And after getting this:

Dab a piece of cloth or cotton in it and press it against the Gorilla glue.
Let the Nitromethane sit on glue for about 5 minutes.
Wash the chemical with dampened cloth, and then scrap the glue from its edge with any pointed tool.

Take off with vegetable oil:

Apart from being a needy kitchen item, vegetable oil unexpectedly helps in lubricating the plastic surfaces.

More specifically, with the help of this oil; the glue can lose its bond from plastic and become easy to remove.

Follow the quick points to begin the solution:

Soak a piece of towel in vegetable oil and press it against the glue.
Let the towel sit for 1 -2 hours.
Remove the Gorilla glue with the help of a knife or any pointed tool.
Clean the remains of glue and oil with a slightly warmed cloth.
Use liquid soap to remove the oiliness from plastic.

Use lubricant spray (Only for stains):

You can use the lubricant spray for removing the remaining stains of Gorilla glue from plastic.

To work with it, spray little of it on the glue, and then wipe the glue spots with a sponge until it doesn’t vanish.

The lubricant will hopefully weaken the strength of the gorilla glue with plastic.

Precautions while removing Gorilla Glue with any mentioned method:

Hold scrapping tools, i.e., chisel, knife, and razor carefully.
Wear protective gloves when using harsh chemicals.
Wear glasses while working with harsh chemicals.
Be attentive, careful, and cautious throughout the removal process.
Always begin scrapping from the edge/boundary of the glue.
Protect unglued plastic from pointed tools and harsh chemicals.

Conclusion:

Removing Gorilla or any super glue is almost impossible.

However, hopefully, after going through the multiple solutions, we believe that you are now satisfied and prepared to implement them on your own.

Thus, get the benefit of the suggested tips with every recommendation to get the gorilla glue off from plastics securely and successfully.

If you have got any other tip(s) or question(s) in mind, please let us know by commenting below or by contacting us here.

Cheers!